The first process: open material
Generally speaking too long hair can not be used directly, need to be cut into the required length. This process is called open material. Cut a good hair different lengths, respectively, can be made into long hair and short hair. If the finished
brazilian virgin hair wig color is mixed, hair must be required according to the requirements of color matching, such as 2T33 color, is the combination of No. 2 and No. 33 color, open the material must be opened when the two colors.
The second process: the whole hair
Just cut a good hair cut more chaotic, need to comb good. At the same time, some color of the brazilian virgin hair wig, need to pass the process to color uniform. The tool of the whole wool is the big steel tooth comb in the figure. Such as wine red and natural black, through this process can be the two colors mixed. Two-color, three-color, and even multi-color can be completed through the whole wool process.
The third process: pound hair
Every brazilian virgin hair wig has a weight, too thick is not natural, too thin is clearly not OK. The staff need to ask according to the requirements of the pound, the weight of the direct impact on the following production process, so this process is very important.
The fourth process: hair
Before the necessary preparation work, from the beginning of this process is really exposed to the production of the brazilian virgin hair wig secret. Hair is hair will be done on a line, the workers in the hands of just a good punch, through the three hair machine together. This sort of hair machine in the market is not ready, must be modified by the factory mechanic to use. The level of its modified technology directly affect the quality of the hair, such as wig is easy to fall off, this process played a crucial role.
The fifth process: cut off
After the hair is very long hair, the car will be the whole hair and other parts of the ratio is divided into the length of the need to cut, and each length can not exceed the length of baking bar, this process is relatively simple The
The sixth process: washing
Cut a good hair, after washing the absorption of nutrients.
The seventh process: insert and pressure three pit
Dry after the hair section to be inserted and pressed three pit to do the most primitive shape
Insert: the main role is to increase the degree of fluffy hair, usually concentrated in the bangs and head part.
Pressure three pit: its main role is not close to the human scalp, generally do in the back of the head part.
The eighth process: curly hair
According to the design of the brazilian virgin hair wig of curvature, the use of different sizes of the tube.
The ninth process: drying
According to the requirements of the drawings will be divided into a good winding of the appropriate curvature of the bar, into the oven, at a constant temperature of 88 degrees Celsius under the state of stereotypes, baking 2 hours after the removal of the demolition, so out of the hair is not easy Deformed. After the volume is completed, part of the raw materials to the car under the process, the other part into the scalp process.
The tenth process: Liu Hai pressure pit
In the bangs on the winding to do some pressure pit technology, can prevent the bangs close to the forehead and lead to shape.
Eleventh process: high car
High car, that is, will be baked brazilian virgin hair wig film, sewn on the wig sets. This process is more complex, the requirements of the technical staff is quite high, the machine is generally combined with the manual method, if it is purely manual cost is very high, of course, the effect is the best.
Twelfth process: scalp production process
Do the fake scalp looks only a little big, but it affects the simulation of the wig. Because that point is completely exposed, there is no hair, like a real person's starting point. This is actually a test of the manufacturers of skill, first, whether the material is appropriate, the second is the exquisite workmanship. Many brazilian virgin hair wigs look fake not because of hair, it is precisely this hair affects the whole,
The thirteenth process: the production process of the hat
Net cap has imported and domestic points. Imported net hat, flexible, more solid, more comfortable to wear.
Fourteenth process: quality inspection
This process is generally completed by the high car foreman, check the location of the car, hair, lines are uniform, whether there is off-line, wig weight is standard, unqualified products will be back to the process rework red work.
The fifteenth process: combing
High car after the wig sets, the basic shape. What do you need to do next? That is sorting out the work, the wig in a special steel comb combing neatly.
Sixteenth process: washing
This is not the general use of water. Is pure water with care solution. The wig in the dubbed care solution soak for 30 minutes, increase the feel.
Seventeenth process: dry
After washing the brazilian virgin hair wig with a dehydration machine dehydrated moisture dry, are generally dry.
Eighteenth process: remove the hat
To this step, there are plastic film on the back of the wig. Must be removed, there are threads, must be cut off.
Nineteenth process: do hair
The care of the whole brazilian virgin hair wig, including the pruning of the bangs.
Twenty steps: packaging
This is the last process, and packaging before there is a general quality inspection to ensure that foolproof, packaging materials are more relaxed, to avoid too much squeeze the wig.
